Lucent Technologies Lineage 2000 ECS-12U - Documentation

Lucent Technologies Lineage
®
2000 ECS-12U Controller J85501E-2
3 - 4 Ordering Issue 3 July 1998
Documentation
This document (Lucent Technologies Select Code 167-790-056)
is part of a set of documents developed to assist engineering and
installers. The following documents are provided with each
controller:
Control cable required to connect one Lucent
Technologies 24-volt Lineage
®
three phase
ferroresonant rectifier (J85503 A or B1
series)
H285-226, L51
Control cable required to connect one 48-volt
Lucent Technologies Lineage
®
three phase
ferroresonant rectifier (J85503 A, B1, C1, and
J85503C2 not e/w List 5)
H285-226, L52
Control cable required to connect one Lucent
Technologies 24-volt Lineage
®
three phase
ferroresonant rectifier (J85503B-2)
H285-226, L53
Control cable required to connect one 48-volt
Lucent Technologies Lineage
®
three phase
ferroresonant rectifier (J85503B-2, J85503C2
e/w List 5, J85503C3, or J85603C2)
H285-226, L54
Control cable required to connect one Lucent
Technologies 150-ampere switchmode
rectifier
H285-226, L56
Table 3-B: Available Rectifier Interface Cables
Cable Description Cable Assembly
Document No. Document Description
J85501E-2
Assembly, Ordering, and Installation
Drawing for ECS-12U Controller
T-83181-30 Wiring Drawing
SD-83181-01 Schematic Drawing
167-790-056 Product Manual
167-790-109
Controller Options Product Manual,
provided when microprocessor board
(CP2) is ordered