Lucent Technologies Lineage
®
2000 ECS-12U Controller J85501E-2
Issue 3 July 1998 Operation 6 - 3
13. V+ and V- jacks Test jacks are available for
monitoring the plant charge bus
voltage with an external meter.
14. Local terminal port Opening in the front panel
reserved for the local terminal
port on the CP2 microprocessor
board.
15. ESD connector Jack provided for electrostatic
discharge grounding with a wrist
strap. The operator should be
grounded to this point before
opening the controller front panel.
To Next Page
Loading...