LulzBot TAZ Workhorse - Page 99

INDEX
quick print prole, 17
R
raft, 19, 64
recommended print settings, 16
relative extrusion, 68
remove all holes, 66
remove mesh intersection, 66
removing a print, 34
RepRap, 88
reset, 22
resolution, 17
retract at layer change, 52
retraction, 52
retraction distance, 52
retraction extra prime amount, 52
retraction speed, 52
rotating object, 21
S
school glue, 80
seam corner preference, 43
SemiFlex, 80
setting visibility, 36
shell settings, 39
skin expand distance, 48
skin overlap percentage, 47
skin removal width, 48
skirt, 19, 63
skirt speed, 54
skirt/brim line width, 37
slicers, 12
slicing, 12
slicing proles, 86
slicing tolerance, 69
smooth rods, 76
soften temperature, 49
software, 12, 14, 86
solid view, 26
source code, 86
source les, 14
spaghetti inll, 71
special modes, 67
speed settings tab, 53
spiralize outer contour, 68
standard quality, 18
standby temperature, 53
STL, 13, 14, 19, 86
support blocker, 24
support brim, 61
support density, 60
support distance settings, 61
support inll line direction, 61
support interface, 62
support material, 18
support options, 59
support overhang angle, 60
support pattern, 60
support tab settings, 58
surface mode, 67
T
t-glase, 80
technical support, 88
temperature, viii
temperature control, 30
temperature monitoring, 30
temperatures, 34
terms and conditions, 90
tetherless printing, 33
Thermal Error Bed, 82
Thermal Error E1, 82
Thermal Error E2, 82
threaded extension, 80
top surface skin layers, 40
top/bottom extruder, 40
99