LulzBot TAZ Workhorse - Page 98

INDEX
minimum layer time, 58
minimum polygon circumference,
70
minimum wall ow, 41
MINTEMP, 82
mirror, 22
modication, 90
mold, 67
mold angle, 67
mold roof height, 67
monitor tab, 28
movement, 31
multiple printers, 32
multiply object, 25
N
New Zealand, x
NinjaFlex, 80
novelties, 86
nozzle, 77, 80
nozzle cooling fan, 78
nozzle switch retraction distance,
53
nozzle switch retraction speed, 53
nozzle wipe, 77
number of slow layers, 55
Nylon, 80
O
OBJ, 19
OctoPrint, 14
ooze shield, 65
OpenSCAD, 13
operating system, 12
optimize wall printing order, 40
orientation, 19
OS X, 12–14
outer before inner walls, 41
outer wall extruder, 39
outer wall inset, 40
outer wall line width, 37
outer wall speed, 54
outer wall wipe distance, 40
overhang wall, 73
P
part removal temperature, 51
pause print, 33
pausing the printing process, 33
PEI, 76, 80
PEI surface, 76
per model settings, 23
phone number, 92
Polycarbonate, 80
power supply, viii
predened commands, 31
prime tower, 64
print cooling, 57
print cooling fan, 78
print proles, 86
print speed, 53
print thin walls, 42
printer host, 14
printer hosts, 12
printing from USB, 32
printing temperature, 49
printing temperature initial layer,
50
probe, 78
PROBE FAIL CLEAN NOZZLE,
83
probe temperature, 49
probing, 78
PVA, 80
Q
quality settings, 36
98