20 - Getting Started
2.4 User ID
There are two types of identification used with the Instrument:
General user
Allows general users to use the Instrument to perform patient and Quality Control
tests, view result history, and adjust preferences including screen brightness and
sounds.
Administrator
The administrator has additional rights to Instrument settings including language,
time and date if the Instrument is being operated in standalone mode. If the
Instrument is being managed in a connected mode then these settings will be
downloaded from Connect Manager.
2.5 Operating Mode and First Time Setup
The language and current date and time will need to be set by the administrator
prior to performing a patient test. Other sound and display preferences can be
set by any user.
Settings will automatically be downloaded to the Instrument if connecting to
LumiraDx Connect Manager. Refer to the “Instrument operation” chapter of this
Platform User Manual for more information on first time setup.
To Next Page