On the packaging and on the identification plate of the Instrument you may
encounter the following symbols, shown here with their meaning:
Symbols
Temperature limitation
Manufacturer
In vitro diagnostic medical device
This product contains electrical and electronic components that
may contain materials which, if disposed with general waste,
could be damaging to the environment. Residents of the European
Union must follow specific disposal or recycling instructions for this
product. Residents outside the European Union must dispose or
recycle this product in accordance with local laws or regulations
that apply
Catalogue Number
Serial Number
“CE Mark“. The product is in compliance with all relevant
European Directives and Regulations. Refer to Declaration of
Conformity for full details
Caution - Consult Instructions for Use. Refer to safety-related
warnings and precaution notes in the Instructions for Use
accompanying this product, e.g. Platform User Manual, Test Strip
Product Insert or Quality Control Product Insert
Indicates that the Instrument can be potentially infectious due to
the samples or reagents used
Direct current - Indicates that the Instrument is suitable for direct
current only and to identify relevant terminals
Universal Serial Bus (USB) Port
Near Field Connectivity (NFC) – Indicates the presence of the
Radio Frequency (RFID) reader
Identifies the power button to power on or power off the Instrument
Consult Instructions for Use
Authorized representative in the European Community
Importer
Unique Device Identifier
5
To Next Page
Loading...