Need help?Do you have a question about the LumiraDx Platform and is the answer not in the manual?
General| Brand | LumiraDx |
|---|---|
| Model | Platform |
| Category | Laboratory Equipment |
| Language | English |
Details the required temperature, humidity, and environmental conditions for storing and operating the Instrument.
Lists essential warnings related to inserting test strips and performing patient tests to prevent errors or hazards.
Outlines precautions to avoid electrical shock, fire, explosions, and ensure safe disposal of the instrument.
Describes the procedure for turning the LumiraDx Instrument on and off, including initial charging.
Describes how to install Lot Calibration Files, which are necessary for the Instrument to process tests.
Details the correct procedure for inserting and removing test strips from the Instrument.
Explains how to apply a single, central drop of sample to the test strip's application area.
Guides through the first-time setup process for Instruments operating in Standalone mode.
Details the first-time setup for Instruments connected to a network or EHR system.
Provides a step-by-step guide on how to perform a patient test using the LumiraDx Instrument.
Explains the importance and process of performing Quality Control tests with the LumiraDx Instrument.
Details the procedure for conducting a Quality Control test on the LumiraDx Instrument.
Details the guidelines and procedures for disinfecting the LumiraDx Instrument, especially for blood-based samples.
Provides steps to troubleshoot when the Instrument fails to detect an inserted Test Strip.
Offers guidance on troubleshooting unexpected Quality Control test failures.
To Next Page