Introduction - 15
1.6 Warnings
Inserting Test Strips
• Do NOT touch Test Strip Sample Application Area.
• Do NOT insert Test Strip when Instrument is powered off.
• Do NOT bend or fold the Test Strip.
• Do NOT touch Test Strip contacts.
• Do NOT apply sample until prompted.
Performing a patient test
• Wear a clean pair of gloves before performing a patient test.
• Place the Instrument on a level, stable surface before performing a test.
• Apply sample AFTER inserting the Test Strip and the Instrument prompt.
• Do NOT apply more than one drop of sample.
• Close the Instrument door after applying the sample and the Instrument
prompt.
• Do NOT touch the Test Strip until the test has finished and the result is
displayed.
• Do NOT open the door or move the Instrument during the test or an error
will result and the test result will not be saved.
• Dispose of all Test Strips used for patient testing safely in accordance with
local regulations and procedures.
• Follow the test operating conditions in the LumiraDx Test Strip Product
Insert.
• Follow the information on correct handling of Test Strips in the LumiraDx
Test Strip Product Insert.
To Next Page
Loading...