LumiraDx Platform - Standalone Instrument First Time Setup

32 - Instrument Operation
4.3 Standalone Instrument
First Time Setup
For Standalone mode Instruments the
language and current date and time will
need to be set by the administrator prior to
performing a patient test. Other sound and
display preferences can be set by any user.
Administrator and general user passwords
for Standalone operation are provided
on a tear out sheet in the Platform Quick
Reference Guide.
1. Power On
Power on the Instrument by pressing the
power button at the rear of the Instrument.
You will hear the Instrument powering on,
and the display will be a blank black screen
for several seconds before starting up. If the
screen is just dimmed tap the touch-screen
to wake up the Instrument.
2. Enter Password
Tap the password field to display the
keyboard.
Enter password (using administrator password
supplied) and tap ‘Login’ to complete the
login.