LX 10k
Advanced operation
Document name: LX 10KUM
Document revision: R1
4.1.4.1 Choosing a Turnpoint
To recap on how to choose a Turnpoint for navigation, follow these steps:
0. Have a .cup file loaded and selected
1. Go to the Turnpoint navigation page
2. Press the right push-rotary knob
3. Select the sorting criteria Name, code and distance available
4. Type in the Name or code if Name or code are chosen as sorting criteria
5. Scroll the list until you find the desired turnpoint. You can scroll regularly with the right
push-rotary knob, or by 10-fold by rotating the left push-rotary knob
6. Confirm the desired point by pressing the right push-rotary
7. The device will automatically take you back to the Turnpoint navigation page and start
navigating to the desired turnpoint.
NOTE
In order to use navigation pages to their full extent, be sure to have airspace (.cub),
turnpoint (.cup) and airport (.af) files installed. Some of these, like .cup and .cub
files, are available on competitions, from club managers, or governing national air
bodies (like DAeC), while other, like the .af file, are provided solely by LX navigation.
NOTE
Files provided by LX navigation (.cub and .af) can be found on
http://www.lxnavigation.com/support/database/. LX navigation does not provide
official .cup files, for unofficial turnpoint files, you can check with your club mates
and webpages like https://www.openflightmaps.org/.
NOTE
All final glide calculations take into account the current wind speed and direction,
as well as reserve altitude and selected MC value. On the Task navigation page,
the final glide calculation takes into account your kinetic energy as well, as
explained in the said page.
Device manual Public 28
To Next Page
Loading...
