LX 10k
Advanced operation
Document name: LX 10KUM
Document revision: R1
4.1.5 Airport navigation page
The Airpor t navigation page is set up in much the same way as the Turnpoint navigation page,
so be sure to check the previous section for additional information.
This page is used for navigating towards a single airport, from the .af file loaded into the LX
10k. The navigation screen shows turnpoints, airports, airspaces and ground elevation on the
map area.
Figure 22. Airport navigation page overview
Basic operation on this page has been explained in the Navigation pages section. Here, we
will explain some specifics of the Airport navigation page, and how to perform basic Airport
operations.
Figure 23. Airport selection sub-page Figure 24. Airport additional info sub-page
Device manual Public 29
To Next Page
