Page 44
6 Firmware Updates
Hilo contains firmware that is field-programmable via the computer connection. These updates improve performance and enhance
functionality of Hilo. In some cases, the touch screen functions and appearance may change dramatically from firmware updates.
Additionally, the LT-USB, LT-TB and LT-DANTE cards installed into Hilo have their own firmware. There are also updates for these
cards available that, similarly, can improve functionality and expand the feature set. The process for updating these cards will be
covered below. First, here are the steps to insure that your Hilo is up to date and in top form:
1.
Make sure that your Hilo has a valid USB, Thunderbolt or Dante connection to the computer. For USB on Windows, or
Thunderbolt for OS X or Windows, current drivers will need to be installed.
2. Visit www.lynxstudio.com and click Support > Downloads.
3. Select your OPERATING SYSTEM from the list, “Hilo” as the PRODUCT, and “All Types” for FILE TYPE. Click
“Search”.
4. Download the Hilo Firmware Updater. Double Click to launch it.
5.
Follow the prompts (Windows Users need to accept the EULA) until you reach the Hilo Firmware Update screen. Verify
that the “New Firmware Version” is higher than the “Current Firmware Version”. If so, click “Update”.
The Hilo LCD screen will display a warning screen that reads “Do not turn off the computer or the Hilo during the firmware updater
process”. There is also a progress bar.
6.
When the Update is complete, you will be instructed to power down Hilo. Turn off the front panel standby switch. Then turn
off the rear panel power switch. Wait three seconds, then power Hilo back up.
Now let’s look at the methods for updating the three expansion cards
6.1 Updating the LT-USB
1. Updating the LT-USB firmware uses the same Hilo Update application with which we update the Hilo. Launch the Hilo
Update application. This time from the “Select Unit to Update” drop-down menu, choose “LT-USB”.
To Next Page
Loading...
Need help?
General
