EasyManuals Logo

Lynx hilo User Manual

Lynx hilo
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #69 background imageLoading...
Page #69 background image
Page 65
11 Specifications
Line In L/R
THD+N -114 dB @1kHz, -1dBFS, 20kHz filter, +22dBu trim
Dynamic Range 121 dB, A-weighted, -60dBFS signal method
Frequency Response ± 0.01 dB, 20 – 20kHz
Crosstalk 140 dB maximum @ 1kHz, -1dBFS signal
Full-scale trim settings: + 0dBV, +2dBV, +4dBV, +6dBV, +18dBu, +20dBu, +22dBu, +24dBu
Female XLR connectors
Line Out L/R
THD+N -109 dB @1kHz, -1dBFS, 20kHz filter, +22dbu trim
Dynamic Range 121 dB, A- weighted, -60dBFS signal method
Frequency Response ± 0.02 dB, 20 – 20kHz
Crosstalk -135 dB maximum @ 1kHz, -1dBFS signal
Full-scale trim settings + 0dBV, +2dBV, +4dBV, +6dBV, +18dBu, +20dBu, +22dBu, +24dBu
Male XLR connectors
Monitor Out L/R
THD+N -107 dB @1kHz, -1dBFS, 20kHz filter, volume at max
Dynamic Range 121 dB, A- weighted, -60dBFS signal method
Frequency Response ± 0.02 dB, 20 – 20kHz
Crosstalk -135 dB maximum @ 1kHz, -1dBFS signal
Output level at max volume +24dBu or +10dBu, jumper selectable
TRS connectors
Headphone Out
THD+N -107 dB @1kHz, -1dBFS, 20kHz filter, volume at max
Dynamic Range 121 dB, A- weighted, -60dBFS signal method
Frequency Response ± 0.02 dB, 20 – 20kHz
Crosstalk -130 dB maximum @ 1kHz, -1dBFS signal
Output level at max volume +19dBu
¼” phone jack on front panel
Digital I/O
AES/EBU Transformer-coupled on XLR connectors
S/PDIF I/O coax Transformer-coupled on RCA jacks
S/PDIF I/O optical On optical connectors
ADAT I/O 8 channels at 48 kHz when selected on optical connectors
Sample Rates
All standard rates up to 192 kHz using SynchroLock sample clock generator
Synchronization Options
Internal
External word clock I/O 75ohm TTL signal on BNC connectors
AES/EBU or S/PDIF inputs
LSlot™ Expansion Port
Supports Lynx LSlot expansion cards with up to 32 input and outputs simultaneously
LCD Display
480 x 282 LCD Touch Screen
Other
AC Power 110 to 230 VAC, 30 watts;
Battery Power 9-18 volts DC on 4-pin XLR
Size 8.50” wide x 3.25” tall x 10.00” deep (216mm x 83mm x 254mm)
Shipping Weight 12 pounds (5.4kg)
Certifications
CE and FCC Class B EMI, CE Product Safety

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lynx hilo and is the answer not in the manual?

Lynx hilo Specifications

General IconGeneral
USBUSB 2.0
Converter TypeAD/DA
Sample Rate44.1kHz to 192kHz
Analog Inputs2 x XLR
Analog Outputs2 x XLR
Digital InputsAES/EBU, S/PDIF
Digital OutputsAES/EBU, S/PDIF
Word ClockIn and Out
Supported Data Rates44.1kHz to 192kHz

Related product manuals