MACROMEDIA FLASH 8-ACTIONSCRIPT 2.0 LANGUAGE - Bevelfilter Constructor

276 ActionScript classes
BevelFilter constructor
public BevelFilter([distance:Number], [angle:Number],
[highlightColor:Number], [highlightAlpha:Number], [shadowColor:Number],
[shadowAlpha:Number], [blurX:Number], [blurY:Number], [strength:Number],
[quality:Number], [type:String], [knockout:Boolean])
Initializes a new BevelFilter instance with the specified parameters.
Availability: ActionScript 1.0; Flash Player 8
Parameters
distance:Number [optional] - The offset distance of the bevel, in pixels (floating point). The
default value is 4.
angle:Number [optional] - The angle of the bevel, from 0 to 360 degrees. The default value is
45.
highlightColor:Number [optional] - The highlight color of the bevel, 0xRRGGBB. The
default value is 0xFFFFFF.
highlightAlpha:Number [optional] - The alpha transparency value of the highlight color.
Valid values are 0 to 1. For example, .25 sets a transparency value of 25%. The default value is
1.
shadowColor:Number [optional] - The shadow color of the bevel, 0xRRGGBB. The default
value is 0x000000.
shadowAlpha:Number [optional] - The alpha transparency value of the shadow color. Valid
values are 0 to 1. For example, .25 sets a transparency value of 25%. The default value is 1.
blurX:Number [optional] - The amount of horizontal blur in pixels. Valid values are 0 to 255
(floating point). The default value is 4. Values that are a power of 2 (such as 2, 4, 8, 16 and
32) are optimized to render more quickly than other values.
blurY:Number [optional] - The amount of vertical blur in pixels. Valid values are 0 to 255
(floating point). The default value is 4. Values that are a power of 2 (such as 2, 4, 8, 16 and
32) are optimized to render more quickly than other values.
strength:Number [optional] - The strength of the imprint or spread. The larger the value,
the more color is imprinted and the stronger the contrast between the bevel and the
background. Valid values are 0 to 255. The default value is 1.
quality:Number [optional] - The number of times to apply the filter. The default value is 1,
which is equivalent to low quality. A value of 2 is medium quality, and a value of 3 is high
quality.