Magellan GPS ColorTRAK User Manual

8 Magellan GPS ColorTRAK
Holding the Receiver
GPS ColorTRAK is designed to fit
comfortably in your hand. Hold the
receiver in the palm of your hand with
the antenna pointing towards the sky.
First Time Use - Initializing the Receiver
You do not need to initialize your receiver each time you use it
unless the receiver’s memory has been cleared or if it has been
transported more than 300 miles while turned off.
Turn the Receiver On
To turn your ColorTRAK on, press PWR.
Because this is the first time you have used
your receiver, a screen will be displayed
prompting you to initialize your receiver. Press
ENTER to begin the initialization process.
If you do not see this screen once the receiver is turned on, then it was
initialized previously. To follow along, press MENU, highlight SETUP
and press ENTER. Highlight INITIALIZE and press ENTER and then
you will be taken through the steps to reinitialize the receiver.
ATTENTION
UNIT IS NOT
INITIALIZED
PRESS
ENTER TO
INITIALIZE

Magellan GPS ColorTRAK Specifications

General

Brand	Magellan
Model	GPS ColorTRAK
Category	GPS
Language	English