30 Magellan GPS ColorTRAK
Selecting Time Format
You may need to correct the current time or change the time format. Your
choices for time format are LOCAL 24HR, LOCAL AM/PM and UTC.
While you are viewing the TIME screen, press
MENU, highlight FORMAT and press
ENTER.
TIME FORMAT
LOCAL 24HR
LOCAL 12HR
UTC
A screen will appear with your format selection and the current time
with a cursor. Use the ARROWs to make any changes to the current
time and press ENTER.
Saving a Waypoint
Waypoints are used to create routes and GOTOs. Before you can set a route
or GOTO, you must have a saved waypoint in your receiver. You have two
options when naming waypoints. You can create waypoints with either a
receiver-created name or with a name you create yourself.
Saving Your Position Fix with a Receiver-Generated Name
From anywhere in the receiver, you can save (MARK) your position with a
receiver created name. This is the fastest way to save your position.
To save a waypoint with a receiver-created name, press MARK, MARK.
The waypoint will be saved with a receiver-generated name beginning
with WPT001, WPT002 and so on.
To Next Page
Loading...
