Magellan GPS ColorTRAK 11
Getting a Fixed Position
Once you have chosen the primary usage for
your GPS ColorTRAK, the STATUS screen
will be displayed. At this point, you should go
outside in an area where you can get a clear
view of the sky. The GPS ColorTRAK will
begin receiving data from the satellites in view
and will display the progress on the STATUS
screen.
Once the receiver has computed a position fix
the POSITION screen will be displayed.
Saving Your Waypoint
Once the receiver has computed your current position, you may save this
position as a waypoint.
To save (MARK) your position as a waypoint,
press MARK, MARK and the waypoint will
be saved with an automatically assigned name.
If this is your first saved position fix, the name
will be WPT001 as shown.
For further information on saving your fixed position with a receiver-
generated name or a user-created name, refer to the Basic Operations
section.
To Next Page
Loading...
Need help?
General