Magellan GPS ColorTRAK User Manual

Magellan GPS ColorTRAK 55
To change the Elevation Mode, press MENU,
highlight SETUP and press ENTER. High-
light ELEV MODE and press ENTER. A
pop-up menu will appear. Highlight 2D or
3D and press ENTER.
If you select 3D, the receiver will return to
SETUP. If 2D is selected, the receiver will ask
for elevation. A pop-up menu will appear, use
the ARROWs to input your elevation and
press ENTER.
The default elevation mode will be 3D.
Selecting Time Format
You have the option of changing the format in which the time is given. Your
choices are LOCAL 24HR, LOCAL AM/PM and UTC.
Press MENU, from any screen, highlight
SETUP and press ENTER. Highlight TIME
FORMAT and press ENTER.
A pop-up menu will be displayed, highlight
your choice and press ENTER.
If UTC is selected, the receiver will return to Setup. If LOCAL24HR or
LOCAL AM/PM are selected, a pop-up menu will be displayed prompt-
ing you to input the correct time. Use the ARROWs and press EN-
TER.
ELEVATION
3D
2D
SETUP
INITIALIZE
NAV SCREENS
COORD SYSTEM
MAP DATUM
ELEV MODE
TIME FORMAT
NAV UNITS
TEMP UNITS
NORTH REF
LIGHT TIMER
BEEPER
PERSONALIZE
CLEAR MEMORY
NMEA
BAUD RATE
SIMULATE
TIME FORMAT
LOCAL 24HR
LOCAL 12HR
UTC
ELEVATION
00000FT

Magellan GPS ColorTRAK Specifications

General

Brand	Magellan
Model	GPS ColorTRAK
Category	GPS
Language	English