Magellan GPS ColorTRAK 13
Basic Operation
3
Power Up Sequence
The receiver is powered up by pressing PWR
(power). On power up, the GPS ColorTRAK
will display the Magellan logo/start up anima-
tion momentarily and then switch to the
STATUS screen. The receiver begins searching
the sky for satellites and begins the process of
computing a position fix.
Navigation Screens
The nine NAV (navigation) screens (STATUS, POSITION, NAV 1, COM-
PASS, NAV 2, PLOT, ROAD, SPEED and TIME ) provide you with neces-
sary information you will need to use the GPS ColorTRAK as a navigational
tool.
NAV screens can be viewed by pressing NAV from any screen. You can scroll
through the NAV screens by repeatedly pressing NAV or the UP/DOWN
ARROWs from any NAV screen.
All screens, except the STATUS and POSITION screens, can be disabled by
turning them off in the NAV SCREENS portion of SETUP.
MAGELLAN
COLORTRAK
To Next Page
Loading...
