Magic Mobility R-NET CJSM2 User Manual

r-net user guide
13 5940A R-net User Guide DCR1266 magicmobility.com.au
5.1.2 SPEED INDICATOR
This displays the current speed setting.
The speed setting is adjusted using the Speed Buttons.
5.1.3 CURRENT PROFILE
The Profile Number describes which Profile the control system is currently
operating in.
The Profile Text is the name or description of the Profile the control system is
currently operating in.
5.1.4 FOCUS
When the control system contains more than one method of direct control, such
as a secondary Joystick Module or a Dual Attendant Module, then the Module
that has control of the wheelchair will display the In Focus symbol.
5.1.5 SPEED LIMIT
If the speed of the wheelchair is being limited, for example by a raised seat, then
this symbol will be displayed.
If the wheelchair is being inhibited from driving, then the symbol will flash.
5.1.6 LATCHED
When the control system is operating in a latched condition this symbol will be
displayed.
5.1.7 RESTART
When the control system requires a reboot; for example, after a module re-
configuration, this symbol will be flashed.
5.1.8 FAULT
The control system can detect a wide variety of errors. When the system has
detected an error that is not severe enough to cause the system to trip, then this
symbol will be displayed.
5.1.9 MOTOR TEMPERATURE
This symbol is displayed when the control system has intentionally reduced the
power to the motors, in order to protect them against heat damage.

Magic Mobility R-NET CJSM2 Specifications