25
(15)
5-MakingbagsfromMAGICVACrolls
®
a)UnrollabagofsuitablelengthandcutitusingtheMAGICCutter
(15)asshowning.B,movingitfromrimtorim.Nowyoucansealan
opensideofthecutbagasfollows:
b)Sealeitherofthetwoopenendsofthebagbypositioningitonthe
sealingbar(11)withthesmoothsidefacingup(g.C).
Warning: be careful not to let the bag hang over into the vacuum
chamber (10) or on the sealing gasket (9); place the end flush with
the external part of the gasket, as shown in the figure.
c)LowertheLid(5)bypressingontheHandle(6)(FIG.D1), and then
withyourotherhandengageitbyrotatingoneofthetwoKnobs(7) in
the arrow direction LOCK(g.D2)TheLid(5) must remain completely
lowered down.(g.D3)
B
C
D1
D2
D3