46
Control unit MGCplus
Description of menus and parameters
Operational view > Main menu > Settings > Safety > General
Parameter Description
Impact response
Close
Select the response for obstacle detection during the closing of the wings.
IMPORTANT! The response for unauthorised access attempts is parameter-
ised via the "Impact response Close" parameters of the "Intrusion", "Wrong
direction" and "Tailgating" menus. ä Page 48, chapter 6.2.4.3 up to
ä Page 50, chapter 6.2.4.5.
Options
› None: The control unit attempts to continue the closing process of the
wings.
› Lock
› Open again
› Close again
› Disable power
Factory setting
› Open again
Impact delay Close Set the duration of the response for obstacle detection during the closing.
ä Page 46, "Impact response Close".
Options
› 3 s, 5 s, 7 s, 10 s or 15 s
Factory setting
› 5 s
Table 21: General
To Next Page
Loading...