EasyManuals Logo
Home>Mahindra>Front End Loaders>4010 HST

Mahindra 4010 HST User Manual

Mahindra 4010 HST
159 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
Safety Starter Switch is to be replaced after every 2000 hours/4 years,
whichever is earlier
TRACTOR RUNAWAY
1. The tractor can start even if the transmission is engaged position causing Tractor to runaway
and serious injury to the people standing nearby the tractor.
2. For additional safety keep the pull to stop knob (fuel shut off control) in fully pulled out position.
Transmission in neutral position, Foot brake engaged and PTO lever in disengaged position
while attending to Safety Starter Switch or any other work on Tractor.
SAFETY STARTER SWITCH
1. Master brake pedal operated safety switch is provided on HST Tractors which allow the starting
system to become operational only when the master brake pedal is fully pressed.
2. Do not By-pass this safety starter switch or work on it. Only Authorized Dealers are
recommended to work on safety starter switch.
3. On some models Safety Starter switch is provided on transmission High-low shifter lever and in
PTO shifter lever. The tractor can be started only if High-low shifter lever is in neutral position.
WORK IN VENTILATED AREA
Do not start the Tractor in an enclosed building unless the doors &
windows are open for proper ventilation, as tractor fumes can cause
sickness or death. If it is necessary to run an engine in an enclosed area
remove the exhaust fumes by connecting exhaust pipe extension.
Caution
21

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mahindra 4010 HST and is the answer not in the manual?

Mahindra 4010 HST Specifications

General IconGeneral
BrandMahindra
Model4010 HST
CategoryFront End Loaders
LanguageEnglish

Related product manuals