EasyManua.ls Logo

Mahindra 4010 HST - Pre-Start Checks; Engine Oil

Mahindra 4010 HST
159 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHECKS AND SERVICE
PRE-START CHECKS
To avoid problems it is recommended that a range of checks be carried out daily before starting
the tractor.
For full details of the items and frequency please refer to the tables on page 60,61 and 62.
ENGINE COOLANT
Remove the radiator cap and ensure that the
coolant is up to the filler neck and that it is
clean with the correct anti-freeze or anti
corrosion inhibitor in it.
If the coolant is a rusty color, drain the
system completely and refill with the
correct mixture of water and anti-freeze or
corrosion inhibitor.
ENGINE OIL
Pull out the stick, wipe it and dip in the oil sump. Ensure that oil level is between the upper and lower
mark near the upper mark. If too low add oil, but never excess 100hrs of service interval
Do not overfill the crankcase with oil.
important
57

Table of Contents

Related product manuals