►
►
►
►
PARKING BRAKE LEVER (B)
Connect the brake pedals, push them down while
pulling the park brake up to engage.
Press the parking brake pedal and push
the Brake pedal to release.
►
►►
►
MASTER BRAKE PEDAL (A)
The master brake pedal is located on the RHS of the operator.
It is used for two functions.
- To stop the tractor
- To release cruise control
A connecting latch is provided to connect the right and left brake pedals for high
speed or road use.
In the interest of safety always use it on the road or at high speed as using one side
only can cause rollovers.
When servicing the tractor ensure that the adjustment on both sides in the same.
►
►
►
►
TURN BRAKE PEDAL (C)
■
■■
■
Tight Turns in the field
To make a tight turn at low speed, use both the steering wheel and the turn brake pedal at the same time.
For left turn, use the left turn brake pedal and for right turn, use the right turn brake pedal.
Perform tight turns only at a slow safe speed.
Doing so at a high speed can cause rollovers and very serious injury or death.
Caution
Do not change from forward to backward or backward to forward suddenly in high
range. Sudden change may result in damage of mechanism and place the operator at
risk of injury.
important
Caution
41