Manitou MAN'GO 12 - Page 65

Icons Menu Sub-menu Parameters
User Dealer / Renters
Visu
Maintenance
Visu
Maintenance
Display of the “CALIBRATION” icon after entry of a code.
Calibrations
1 - Engine rpm calibration
X
2 - Joystick calibration
X
3 - Speed calibration
Max raising speed for lower arms
X
Max lowering speed for lower arms
X
Max raising speed for upper arm
X
Max lowering speed for upper arm
X
Max telescope extension speed
X
Max telescope retraction speed
X
Max pendular arm raising speed
X
Max pendular arm lowering speed
X
Max basket tilt extension speed
X
Max basket tilt retraction speed
X
Max turret right rotation speed
X
Max turret left rotation speed
X
Max basket right rotation speed
X
Max basket left rotation speed
X
Max forward translation speed in Work
mode
X
Max reverse translation speed in Work
mode
X
4 - Overload calibration
X
5 - Generator calibration
X
6 - Parameter
management
Restore machine parameters
X
Save machine parameters
X
Return to pre-set factory values
X
2 - 43
647533 (09/10/2015) MAN'GO 12