C5 – TURRET ORIENTATION CROWN
GREASE
The bearing raceways and the teeth must be lubricated every 250 hours of operation
and after a long stoppage period.
- Grease to be used: See the LUBRICANTS section.
- Open the left hood of the turret.
- Find the 2 grease points1 and grease thoroughly.
- Close the chassis left cover.
- Spread lubricant over the crown’s teeth and the pinion with a paint brush 1.
- Lubricant to be used: See the LUBRICANTS section.
3 - 19
1
1
1
647533 (09/10/2015)
MAN'GO 12
To Next Page
Loading...
