Manitou MHT 10225 - E - Removing the Fuel Oil Filter and Pump

(05/06/2012)10-06-M184EN
10
8 ENGINE REMOVAL
E - REMOVING THE FUEL OIL FILTER AND PUMP
Carry out operation A.
Disconnect the fuel incoming and outgoing tubes (Ref. 1) from
the  lter, taking care to keep these facing upwards to avoid
draining the tank.
Disconnect the connector (Ref. 2) from the fuel  lter (Ref. 3).
Slacken the screws (REf. 4) and remove the fuel  lter (Ref. 3)
from the engine.
Slacken the screws (Ref. 5) and remove the fuel pump
(Ref. 6) from the engine.
1
1
3
2
4
3
6
5
5
5