(05/06/2012) 10-06-M184EN
10
17ENGINE REMOVAL
REMOVING THE RADIATOR MOTOR
Slacken the screw (Ref. 1) to release the gas spring (Ref. 2) from
the engine hood (Ref. 3).
Slacken the screws (Ref. 4) and remove the hood (Ref. 3) from
the vehicle.
Slacken the screws (Ref. 5) and remove the silent blocks (Ref.
6) also in the lower part of the radiator.
Disconnect the feed pipe (Ref. 7) and drainage pipe (Ref. 8) from
the hydraulic motor (Ref. 9).
Keep the pipes facing upwards to prevent the oil from owing
out.
1
2
3
4
3
5
6
6
7
8
9
To Next Page
Loading...
