(05/06/2012)10-06-M184EN
10
18 ENGINE REMOVAL
Secure the radiator (Ref. 10) to an overhead crane and incline
it as far as possible from the side opposite the engine.
Slacken the screws (Ref. 11) and remove the grille (Ref. 12).
Slacken the nuts (Ref. 13) used for tting the fan (Ref. 14).
Remove the fan hub (Ref. 15).
Slacken the xing screws (Ref. 16) and remove the hydraulic
motor
(Ref. 9) from the grille (Ref. 12).
11
12
10
14
13
15
16
9
12
To Next Page
Loading...
