00-00-M184EN
GENERAL INSTRUCTIONS AND SAFETY NOTICE
This chapter deals with the general instructions and safety notice during inspection and maintenance
work.
Other instructions and warnings are indicated in each chapter concerned.
In order to reduce accident risks, make sure to:
– Follow the instructions in the truck operating and maintenance manual.
This manual should be found in all trucks.
– Please follow all safety instructions.
– Use the appropriate tools for any work to be performed.
– Use original Manitou spare parts.
Any non-compliance increases the risk of accidents occurring which may lead to causing grievous bodily
harm and even death.
An e cient, dependable and pro table combination will be formed if the operator follows the safety
manual correctly and the machine is serviced properly.
When you see this symbol:
It means: Warning! Be careful! Your safety, somebody else’s or the safety of the lift truck itself
is at risk.
The manufacturer cannot predict all possible risky situations. Consequently, the safety instructions
given in the safety manual are not exhaustive.
At any time, as an operator, you must envisage, within reason, the possible risk to yourself, to others or
to the lift truck itself when you repair, service or drive it.
Manitou cannot be held responsible for the use of any lifting devices, tools or operating methods other
than those speci ed.
PREAMBLE
(05/06/2012)
00
2
00
To Next Page
Loading...
Need help?
General
