00-00-M184EN
GENERAL INSTRUCTIONS AND SAFETY NOTICE
RULES FOR MAINTENANCE
Do not carry out any work on the machine unless you have followed
a suitable training course and have the knowledge required for it.
Make sure you have taken into consideration all the indicator plates
on the machine and in the instruction manual.
Be careful not to burn yourself when touching hot liquids or parts
when operations have to be done before the machine has had
time to cool down.
Before carrying out any operation on an electrically powered
component, activate the battery cut-o .
If the telehandler does not have a battery isolating switch, disconnect
the battery terminals then gather them.
b
Before carrying out any welding operations, think of
disconnecting computers.
A machine operating in a contaminated environment should be
specifically equipped. Moreover, local safety notices deal with
maintenance and repair work on such machines.
(05/06/2012)
00
4
00
ECU
2
1
To Next Page
Loading...
Need help?
General
