26 - LIFTING RING ON SINGLE CARRIAGE
CONDITIONS OF USE
t
IMPORTANT
t
Follow the instructions given in the instruction manual (e1-OPERATING AND SAFETY INSTRUCTIONS:
INSTRUCTIONS FOR HANDLING LOADS).
The load charts are defined for use without forks and without attachments (eSAFETY PLATES AND
STICKERS).
- The lifting ring must be used WITHOUT FORKS AND ATTACHMENTS, but
the angle of inclination of the carriage must be same as when the forks
are used in the horizontal position.
- Check the maximum permitted angle, which is 45°.
- Do not change the angle of the carriage while using the lifting ring.
- The lifting hook, the chains and slings shall have a minimum capacity of 3000 kg with a safety coefficient of 4 in relation
to breakage.
2 - 68
To Next Page
Loading...
