EasyManua.ls Logo

Manitou MT 733 EASY 75D ST5 S1 - Boom Safety Wedge; Fuel Tank

Manitou MT 733 EASY 75D ST5 S1
162 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
45 - FUEL TANK
As far as possible, keep the fuel tank well filled in order to minimise condensation due
to the atmospheric conditions.
t
IMPORTANT
t
Never smoke or approach with a flame during filling operations or when the tank is open.
Never refill while engine is running.
- If necessary, add diesel (e3-MAINTENANCE: LUBRICANTS AND FUEL).
- Remove the cap1.
- Fill the fuel tank with clean diesel filtered through the filler port.
- Refit the cap.
- Visually check that there is no leakage in the tank and pipes.
NOTE: A locking tank cap is available as an OPTION.
44 - BOOM SAFETY WEDGE
t
IMPORTANT
t
Only use the wedge supplied with the lift truck.
The lift truck is equipped with a boom safety wedge which must be installed on the rod
of the lifting cylinder when working beneath the boom (e1-OPERATING AND SAFETY
INSTRUCTIONS).
2 - 56
1
647776 (28/02/2020)
MT 733/933/1033 EASY 75D ST5 S1
www.duma-rent.com

Table of Contents

Other manuals for Manitou MT 733 EASY 75D ST5 S1

Related product manuals