1 - 30
LIFT TRUCK MAINTENANCE INSTRUCTIONS
GENERAL INSTRUCTIONS
- Ensure the area is sufficiently ventilated before starting the lift truck.
- Wear clothes suitable for the maintenance of the lift truck, avoid wearing jewellery and loose clothes. Tie back and protect
your hair, if necessary.
- Stop the engine and remove the ignition key, when an intervention is necessary.
- Read the operator's manual carefully.
- Carry out all repairs immediately, even if the repairs concerned are minor.
- Repair all leaks immediately, even if the leak concerned is minor.
- Ensure that process materials and of spare parts are disposed in all safely and in an ecological manner.
- Be careful of the risk of burns and splashing (exhaust, radiator, engine, etc.).
PLACING THE BOOM SAFETY WEDGE
- The lift truck is equipped with a boom safety wedge (e2-DESCRIPTION: COMMAND
AND CONTROL INSTRUMENTS) that must be installed on the rod of the lifting
cylinder when working beneath the boom.
FITTING THE WEDGE
- Fully raise the boom.
- Place the safety wedge 1 on the rod of the lifting cylinder and secure with the rod
2 and the pin 3.
- Slowly lower the boom then stop the hydraulic movements before it comes into
contact with the wedge.
REMOVING THE WEDGE
- Fully raise the boom.
- Remove the pin and the rod.
- Return the safety wedge to the storage location provided on the lift truck.
t
IMPORTANT
t
Only use the wedge supplied with the lift truck.
2
3
1
MAINTENANCE
- Perform the periodic service (e3-MAINTENANCE) to keep your lift truck in good working condition. Failure to perform
the periodic service may cancel the contractual guarantee.
MAINTENANCE LOGBOOK
- The maintenance operations carried out in accordance with the recommendations given in Part: 3-MAINTENANCE and
the other inspection, servicing or repair operations or modifications performed on the lift truck or its attachments are
recorded in a maintenance logbook. The entry for each operation should include the date of the work, the names of
the individuals or companies having performed them, the type of operation and its frequency, if applicable. The part
numbers of any lift truck components that are replaced are indicated.
To Next Page
Loading...
Need help?
General
