Manitowoc MAX-ER 16000 - Safety and Information Signs; Maintaining Signs; Ordering Signs

Reference Only
Manitowoc Published 04-17-17, Control # 067-11 2-5
16000 HANGING MAX-ER® OPERATOR MANUAL SAFETY INFORMATION
2
SAFETY AND INFORMATION SIGNS
Maintaining Signs
The crane owner/user shall make sure that all safety and
information signs are legible and installed at the proper
locations on the crane. If a sign has been defaced or
removed, it must be replaced immediately. See the
Nameplate and Decal Drawing at the end of this section for
the installation locations of signs.
Ordering Signs
Order replacement safety and information signs from your
Manitowoc dealer.
When ordering a sign, give the crane model number, the
crane serial number, and the name and part number of the
sign.