7-4 Accessories DKR Drive Controllers
DOK-DIAX03-DKR********-PR02-EN-P
7.3 Mechanical accessories
Accessories for duct cooling
The accessories required with duct cooling depend upon the drive.
The accessories needed for DKR02 and DKR03 drives are contained in
the accessory kit "M1-RAC3".
The conversion accessories for the DKR04 drive are in the accessory kit
"M2-RAC2".
The ducts must be ordered separately (see chapter 5.4, Fig. 5-16 and Fig.
5-17).
Mounting frames
In order to stabilize thin mounting panels or rear walls of the control
cabinets, a mounting frame is used for DKR04, if the cooling method
implements outside air. The mounting frame makes the control cabinet
firm (see page 5-14).
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
To Next Page
Loading...
