Manufacture Technology GEFXL2-CSW28KX - 3-6.4 Status

Publication date: March, 2012
Revision A1
103
3-6.4 Status
The section describes when you complete the MLD Snooping and how to display the MLD
Snooping Status and detail information. It will help you to find out the detail information of
MLD Snooping status.
Web Interface
To display the MLD Snooping Status in the web interface:
1. Click Configuration, MLD Snooping, Status
2. If you want to auto-refresh the information then you need to evoke the
“Auto-refresh”
3. Click “ Refresh“ to refresh a entry of the MLD Snooping Status
Information.
4. Click “ Clear“ to clear the MLD Snooping Status..
Figure 3-6.4: The MLD Snooping Status
Parameter description:
 VLAN ID :
The VLAN ID of the entry.
 Querier Version :
Working Querier Version currently.
 Host Version :
Working Host Version currently.
 Querier Status :
Show the Querier status is "ACTIVE" or "IDLE".
 Queries Transmitted :
The number of Transmitted Queries.
 Queries Received :
The number of Received Queries.
 V1 Reports Received :
The number of Received V1 Reports.