Manufacture Technology GEFXL2-CSW28KX - 2-6.7 Tarp

Publication date: March, 2012
Revision A1
34
2-6.7 Tarp
The function is used to configure SNMP trap. To create a new trap account, please check <No
number> button, and enter the trap information then check <Apply>. Max Group Number : 6.
Web Interface
To configure SNMP Trap setting:
1. Click SNMP, Trap .
2. Display the SNMP Trap Hosts information table.
3. Choice a entry to display and modify the detail parameters or click
delete button to delete the trap hosts entry.
Figure 2-6.7: The SNMP Trap Host Configuration
Parameters description:
 Delete:
Check <Delete> entry then check <Save> button, the entry will be delete.
 Trap Version:
You may choose v1, v2c or v3 trap.
 Server IP:
To assign the SNMP Host IP address.
 UDP Port:
To assign Port number. Default: 162