Manufacture Technology GEFXL2-CSW28KX - 3-8.2 LLDP Neighbours

Publication date: March, 2012
Revision A1
116
3-8.2 LLDP Neighbours
This page provides a status overview for all LLDP neighbours. The displayed table contains a
row for each port on which an LLDP neighbour is detected. The columns hold the following
information:
Web Interface
To show LLDP neighbours:
1. Click LLDP Neighbours
2. Click Refresh for manual update web screen
3. Click Auto-refresh for auto-update web screen
Figure 3-8.2: The LLDP Neighbours information
NOTE: If your network without any device supports LLDP
then the table will show “No LLDP neighbour information
found”.
Parameter description:
 Local Port :
The port on which the LLDP frame was received.
 Chassis ID :
The Chassis ID is the identification of the neighbour's LLDP frames.
 Remote Port ID :
The Remote Port ID is the identification of the neighbour port.
 System Name :
System Name is the name advertised by the neighbour unit.
 Port Description :
Port Description is the port description advertised by the neighbour unit.
 System Capabilities :
System Capabilities describes the neighbour unit's capabilities. The possible capabilities
are:
1. Other
2. Repeater
3. Bridge
4. WLAN Access Point
5. Router
6. Telephone