Publication date: March, 2012
Revision A1
3-16.4 Port Shaping
This section provides an overview of QoS Egress Port Shaping for all switch ports. Others the
user could get all detail information ot the ports belong to the currently selected stack unit, as
reflected by the page header.
Web Interface
To display the QoS Port Shapers in the web interface:
1. Click Configuration, QoS, Port Shapers
2. Display the QoS Egress Port Shapers
Figure 3-18.4: The QoS Egress Port Shapers
Click the Port index to set the QoS
Egress Port Shapers
To Next Page
Loading...