Publication date: March, 2012
Revision A1
3-12.2 Statistics
The section describes to port statistics of GARP for all switch ports.The port statistics relate to
the currently selected stack unit, as reflected by the page header.
Web Interface
To display GARP Port statistics in the web interface:
1. Click GARP statistics.
2. Scroll which port you want to display the GARP Counter information..
3. Click Refresh to modify the GARP statistics information.
Figure 3-12.2: The GARP Port Statistics
Parameter description:
Port :
The Port coulmn shows the list of all ports for which per port GARP statistics are shown.
Peer MAC :
Peer MAC is MAC address of the neighbour Switch from with GARP frame is received.
Failed Count :
explain Failed count here...
Auto-refresh :
To evoke the auto-refresh icon then the device will refresh the information automatically.
Upper right icon (Refresh):
You can click them for refresh the GARP Port Statistics information by manual.
To Next Page
Loading...