Publication date: March, 2012
Revision A1
Chapter 5. Maintenance
This chapter describes all of the switch Maintenance configuration tasks to enhance
the performance of local network including Restart Device, Firmware upgrade,
Save/Restore, Import/Export, and Diagnostics.
5-1 Restart Device
This section describes how to restart switch for any maintenance needs. Any configuration
files or scripts that you saved in the switch should still be available afterwards.
Web Interface
To configure a Restart Device Configuration in the web interface:
1. Chick Restart Device.
2. Click Yes.
Figure 5-1.1: The Restart Device
Parameter description:
Restart Device :
You can restart the stack switch on this page. After restart, the stack switch will boot
normally.
Buttons:
Yes – Click to “Yes” then the device will restart.
No- Click to undo any restart action.
To Next Page
Loading...