Publication date: March, 2012
Revision A1
4-8.2 Statistics
This section shows you a detailed statistics of the Access Management including HTTP,
HTTPS, SSH. TELNET, ans SSH.
Web Interface
To configure an Assess Management Statistics in the web interface:
1. Checked “Auto-refresh”.
Figure 4-8.2: The Access Management Statistics
Parameter description:
Interface :
The interface type through which the remote host can access the switch.
Received Packets :
Number of received packets from the interface when access management mode is enabled.
Allowed Packets :
Number of allowed packets from the interface when access management mode is enabled
Discarded Packets. :
Number of discarded packets from the interface when access management mode is
enabled.
Auto-refresh :
To evoke the auto-refresh icon then the device will refresh the information automatically.
Upper right icon (Refresh, Clear):
You can click them for refresh the Access Management Statistics information by manual.
Others you can click the clear button to clean up all entries.
To Next Page
Loading...