Publication date: March, 2012
Revision A1
3-3.2.2 System Status
This section describes that when you complete to set LACP function on the switch then it
provides a status overview for all LACP instances
Web Interface
To display the LACP System status in the web interface:
1. Click Configuration, LACP, System Status
2. If you want to auto-refresh the information then you need to evoke the
“Auto-refresh”.
3. Click “ Refresh“ to refresh the LACP System Status.
Figure 3-3.2.2: The LACP System Status
Parameter description:
Aggr ID :
The Aggregation ID associated with this aggregation instance. For LLAG the id
is shown as 'isid:aggr-id' and for GLAGs as 'aggr-id'
Partner System ID :
The system ID (MAC address) of the aggregation partner.
Partner Key :
The Key that the partner has assigned to this aggregation ID.
Last changed :
The time since this aggregation changed.
Local Ports :
Shows which ports are a part of this aggregation for this switch/stack. The
format is: "Switch ID:Port".
Auto-refresh:
To evoke the auto-refresh to refresh the information automatically.
Upper right icon (Refresh)
You can click them for refresh the LACP System status information by manual.
To Next Page
Loading...