Publication date: March, 2012
Revision A1
Chapter 1 Operation of Web-based Management
Initial
Configuration
This chapter instructs you how to configure and manage the GEFXL2-
CSW28KX through the web user interface. With this facility, you can
easily access and monitor through any one port of the switch all the status
of the switch, including MIBs status, each port activity, Spanning tree
status, port aggregation status, multicast traffic, VLAN and priority status,
even illegal access record and so on.
The default values of the GEFXL2-CSW28KX are listed in the table below:
After the GEFXL2-CSW28KX has been finished configuration the it
interface, you can browse it. For instance, type http://192.168.1.1 in
the address row in a browser, it will show the following screen and ask
you inputting username and password in order to login and access
authentication.
The default username is “admin” and password is empty. For the first
time to use, please enter the default username and password, and then
click the <Login> button. The login process now is completed. In this
login menu, you have to input the complete username and password
respectively, the GEFXL2-CSW28KX will not give you a shortcut to
username automatically. This looks inconvenient, but safer.
In the GEFXL2-CSW28KX, it supports a simple user management function
allowing only one administrator to configure the system at the same time.
If there are two or more users using administrator’s identity, it will allow
the only one who logins first to configure the system. The rest of users,
even with administrator’s identity, can only monitor the system. For those
who have no administrator’s identity, can only monitor the system. There
are only a maximum of three users able to login simultaneously in the
GEFXL2-CSW28KX.
NOTE:
When you login the Switch WEB/CLI to manager. You must first
type the Username of the admin. Password was blank, so when
you type after the end Username, please press enter.
Management page to enter WEB/CLI.
When you login GEFXL2-CSW28KX series switch Web UI
management, you can use both ipv4 ipv6 login to manage
To optimize the display effect, we recommend you use Microsoft
IE 6.0 above, Netscape V7.1 above or FireFox V1.00 above and
have the resolution 1024x768. The switch supported neutral web
browser interface
To Next Page
Loading...