Manufacture Technology GEFXL2-CSW28KX - 2-6.6 Access

Publication date: March, 2012
Revision A1
32
2-6.6 Access
The function is used to configure SNMPv3 accesses. The Entry index key are Group Name,
Security Model and Security level. To create a new access account, please check <Add new
access> button, and enter the access information then check <Save>. Max Group Number :
14
Web Interface
To display the configure SNMP Access in the web interface:
1. Click SNMP, Accesses.
2. Click Add new Access.
3. Specify the SNMP Access parameters.
4. Click Save.
5. If you want to modify or clear the setting then click Reset.
.
Figure 2-6.6: The SNMP Accesses Configuration
Parameter description:
 Delete
Check to delete the entry. It will be deleted during the next save.
 Group Name
A string identifying the group name that this entry should belong to. The
allowed string length is 1 to 32, and the allowed content is ASCII characters
from 33 to 126.
 Security Model
Indicates the security model that this entry should belong to. Possible security
models are:
any: Any security model accepted(v1|v2c|usm).
v1: Reserved for SNMPv1.
v2c: Reserved for SNMPv2c.
usm: User-based Security Model (USM).
 Security Level