Publication date: March, 2012
Revision A1
3-3.2.4 Port Statistics
This section describes that when you complete to set LACP function on the switch then it
provides a Port Statistics overview for all LACP instances
Web Interface
To display the LACP Port status in the web interface:
1. Click Configuration, LACP, Port Statistics
2. If you want to auto-refresh the information then you need to evoke the
“Auto refresh”.
3. Click “ Refresh“ to refresh the LACP Statistics.
Figure 3-3.2.4: The LACP Statistics
Parameter description:
Port :
The switch port number.
LACP Received :
Shows how many LACP frames have been received at each port.
LACP Transmitted :
Shows how many LACP frames have been sent from each port.
Discarded :
Shows how many unknown or illegal LACP frames have been discarded at each
port.
Auto-refresh:
To evoke the auto-refresh to refresh the information automatically.
Upper right icon (Refresh, Clear)
You can click them for refresh the LACP port statistics information or clear by
manual.
To Next Page
Loading...