Manufacture Technology GEFXL2-CSW28KX - 2-6.4 Groups

Publication date: March, 2012
Revision A1
29
2-6.4 Groups
The function is used to configure SNMPv3 group. The Entry index key are Security Model and
Security Name. To create a new group account, please check <Add new group> button, and
enter the group information then check <Save>. Max Group Number : v1: 2, v2: 2, v3:10.
Web Interface
To display the configure SNMP Groups in the web interface:
1. Click SNMP, Groups.
2. Specify the Privilege parameter.
3. Click Save.
Figure 2-6.4: The SNMP Groups Configuration
Parameter description:
 Delete
Check to delete the entry. It will be deleted during the next save.
 Security Model
Indicates the security model that this entry should belong to. Possible security
models are:
v1: Reserved for SNMPv1.
v2c: Reserved for SNMPv2c.
usm: User-based Security Model (USM).
 Security Name
A string identifying the security name that this entry should belong to. The
allowed string length is 1 to 32, and the allowed content is ASCII characters
from 33 to 126.
 Group Name
A string identifying the group name that this entry should belong to. The
allowed string length is 1 to 32, and the allowed content is ASCII characters