Publication date: March, 2012
Revision A1
2-1.2 Configuration
You can identify the system by configuring the contact information, name, and location of the
switch.
Web interface
To configure System Information in the web interface:
1. Click System, System Information, Configuration.
2. Write System Contact , System Name, System Location information
in this page.
3. Click Save
Figure 2-1.2: System Information configuration
Parameter description:
System Contact :
The textual identification of the contact person for this managed node, together
with information on how to contact this person. The allowed string length is 0
to 255, and the allowed content is the ASCII characters from 32 to 126.
System Name :
An administratively assigned name for this managed node. By convention, this
is the node's fully-qualified domain name. A domain name is a text string
drawn from the alphabet (A-Za-z), digits (0-9), minus sign (-). No space
characters are permitted as part of a name. The first character must be an
alpha character. And the first or last character must not be a minus sign. The
allowed string length is 0 to 255.
System Location :
The physical location of this node(e.g., telephone closet, 3rd floor). The allowed
string length is 0 to 255, and the allowed content is the ASCII characters from
32 to 126.
To Next Page
Loading...